Tire Maintenance In Stratford

February 5th, 2010 by greg106

With the recent focus in Stratford on improving fuel economy, we’ve been told how important it is to maintain our tire pressure.

Everyone in Stratford knows that tires wear out, but we all want to make them last as long as possible because they’re fairly expensive to replace. In addition to saving gas, properly inflated tires last longer. Under-inflated tires will wear out more quickly.

Some people in Stratford wonder if there is benefit to adding a few extra pounds of pressure when they fill up their tires. But actually, there isn’t. In fact, there are very good reasons not to over-inflate your tires. For one, the middle of the tread will wear unevenly because the full tread is not contacting the road properly. That also adversely affects your handling.

Come in and see us about tire maintenance for your Milford, Connecticut vehicle.
Autoworks of Devon
409 Bridgeport Ave
Milford, Connecticut 06460
203-877-1478

Every vehicle in the Stratford area has a sticker on the driver’s side door jamb that tells you the manufacturer’s recommended tire pressure. This recommendation is an integral part of the vehicle’s suspension tuning. A lot of engineering actually goes into the recommended tire pressure, so it’s important to follow it.

What else do we need to know about tire maintenance? Tire rotation and balancing are very important. Let’s start with rotation. Because the front tires handle the brunt of turning forces, the shoulders of the front tires wear more quickly than the rear tires. We rotate the tires so that they all get to do some duty on the front and they’ll all wear evenly over their life.

For most vehicles, front tires are rotated to the rear and vice versa. Others recommend a cross rotational pattern. Some vehicles use an asymmetrical tire so those tires need to stay on either the right or left side – it’ll say which on the tire. Some high performance cars have asymmetrical tires and different sizes on the front and rear. These can’t be rotated at all. Your owner’s manual will have details for your car.

How often should you rotate your tires? Your owner’s manual will have a recommendation. Your service advisor at Autoworks of Devon can do a visual inspection to let you know if it looks like it should be done. The interval is typically around 5,000 miles.

You know, some people don’t think new tires need to be balanced. What they aren’t taking into account is the wheel. Between the wheel and the tire – even a new tire – there’s enough variation to require balancing.

When you add the valve stem and tire pressure monitoring sensors required on new cars, balancing is definitely in order. When a tire’s out of balance, it’s actually hopping down the road. You’ll feel the vibration through the steering wheel if a front tire’s out of balance and through your seat if it’s a rear tire.

Proper wheel balance promotes tire life and increases safety. Historically, lead weights have been attached to the wheel to bring it into balance. Lead gives some environmental concern, so steel weights are starting to be substituted.

Also, always use the same size tire on an axle. Different size tires on the front or on the back can lead to some real handling problems. And tire manufacturers recommend that when you get two new tires, they be installed on the rear because that’s where you need the most traction to avoid spinning-out.

Posted in Tires and Wheels | No Comments »

The Harm In Skipping An Oil Change For Milford Drivers

January 29th, 2010 by greg106

People in Milford have been hearing a lot about higher oil change intervals these days. Maybe you’re wondering: What are the key issues?

Some new vehicle manufacturers in Milford are now recommending much higher oil change intervals than they have in the past. As much as 5,000 to 8,000 miles or more. This practice came under scrutiny when four of the largest new car manufacturers announced that owners like those in Milford were experiencing engine damage resulting from these higher oil change intervals.

The manufacturers’ standard oil drain service for particular vehicles was scheduled at around 7,500 miles. People following these recommendations were experiencing engine damage. It turns out that oil sludge was building up. This caused small oil passages to clog and engine parts to fail.

What causes oil sludge? It’s a factor of time and mileage. There are hot spots in every engine that cause oil burn off that leads to sludge. Also, water from normal condensation can build up in the oil. This water also creates sludge. Severe driving conditions lead to more rapid sludge formation.

Visit Autoworks of Devon in Milford, Connecticut 06460

Severe driving around Milford includes short trips under four miles or trips under ten miles in freezing conditions. The engine just doesn’t get warm enough for the water in the oil to evaporate.

Severe conditions are at the heart of the problem. Stop-and-go driving, towing, dusty conditions, heavy loads, very hot or very cold temperatures, a car top carrier – these are all conditions that would suggest that the severe service schedule should be considered.

The severe service schedule has much shorter oil change intervals. People in Milford just need to honestly evaluate how they drive to determine if they should change their oil closer to the severe service schedule, or to the standard schedule.

Some types of Sedan will give oil change reminders. But it’s important to know how that reminder is determined. For some, the reminder simply comes when the standard mileage interval has rolled around. Others use a computer algorithm that takes into consideration the number of cold starts, trip length, engine temperature and so on. It’s programmed to approximate where on the standard/severe service spectrum you fall. Some more expensive vehicles actually have sensors that test the cleanliness and effectiveness of the oil.

For the rest of us, better safe than sorry should be the guiding principle. Talk with your Milford service advisor at Autoworks of Devon and work it out together. Find out what kind of oil the factory sends out in your vehicle. Sometimes it’s a premium grade that costs more than standard oil – but it may be what’s needed to meet a higher factory recommended interval.

If you’re realistically conservative, standard grades of oil will take care of you year after year. If you want to push the limits, ask for a premium grade oil to give you extra protection.

So, what happened with those manufacturers with the problems from higher oil change intervals? They ended up extending the engine warranty for parts that were affected by oil sludge. But they had a stipulation – they lowered the oil change interval and the vehicle owner had to provide proof of oil changes at the new lower interval to keep the extended warranty.

Posted in Maintenance | No Comments »

Diesel Maintenance For Connecticut

January 21st, 2010 by greg106

At Autoworks of Devon we hear from a lot of people who are excited about the new diesel engines that will soon be available in passenger cars and SUV’s. But our Connecticut friends are often curious about the preventive maintenance requirements. People may not know that diesel engines have long been used extensively in Europe and Asia. In fact, in some markets, there’re nearly as many diesel powered passenger cars as there are gasoline.

Here’s who’s announced or is expected to announce new diesels for North America: BMW, Mercedes, Audi, Volkswagen, Nissan, Honda, Toyota, Hyundai and Subaru. Of course, the US auto makers will be expanding their diesel offerings as well. Diesels will become a very big deal here in Connecticut.

You may ask, why has it taken so long getting to Connecticut and North America? There are a bunch of reasons like fuel tax policies and such, but the biggest hurtle was that Connecticut diesel fuel had a high sulfur content – too high for the latest generation of highly refined diesel engines. Recent government mandates to remove sulfur now opens up Connecticut to the engines the rest of the world’s been enjoying for a long time.

Why are diesels so popular worldwide? Well, for starters, diesels get up to 30% better fuel economy than gas engines. And they last a lot longer. And modern diesel engines are refined, quiet and powerful – and there’s none of that black smoke we used to see.

Some people may think that diesels create more pollution. But, you need to rethink diesels. Environmental pollution standards for diesel cars and light trucks are scheduled to be as strict as they are for gasoline vehicles. A modern diesel engine is as clean as a gas engine.

You may also have heard a lot in the news about bio-diesel. The exciting thing about diesels is that they’re not limited to fossil fuels. They can run on fuel made from vegetable oil. There are refineries that make diesel fuel from cellulosic waste like woodchips from lumber mills. There’s even this cool new process where a special strain of algae is used to convert carbon dioxide, water and sunshine into bio-diesel. That’s still a ways off, but you can see that diesel can become a sustainable source of fuel.

And, there are not a lot of trade off’s with diesel in terms of performance. A modern passenger car diesel is very smooth, quiet and quick. Most folks wouldn’t notice any difference. For those who tow trailers and haul heavy loads, diesels will be an improvement.

Now diesel engines are heavy duty, so they cost more than gas engines. But they get better fuel economy – so the break-even point is largely dependent on the difference between Connecticut gas and diesel prices at the pump and how many miles you drive. And diesels have a higher resale value.

Now, let’s get back to diesel maintenance. You have to keep in mind that most of the new diesels are just coming in, or will be over the next couple of years, so we don’t have the maintenance schedules to make direct comparisons yet.

But going off what we already have in Connecticut, we can expect fluid drain intervals to be similar to gasoline engines. Diesels do require very clean fuel, air and oil, so their filters are much higher capacity than gasoline filters and cost more. The engine air filter needs to be changed more frequently as well.

Repair costs are similar. As with gasoline engines, proper maintenance is the key to long engine life and to avoiding repairs. So pretty much what we have come to expect with gas vehicles; coolant system service, transmission service, power brakes, power steering, differential, filters, fuel system, and so on. And the payoff for you, if you’re the kind that likes to keep your vehicles for a long time, is that a properly maintained diesel engine can last for hundreds of thousands of miles.

Posted in Fuel System | No Comments »

Milford Drivers Severe Service Maintenance Schedules

December 30th, 2009 by greg106

Your vehicle manufacturer publishes two auto maintenance schedules. The regular schedule and the severe service schedule. It’d be wrong for us to tell you that everyone in Bridgeport always needs to follow the severe service schedule – but its wishful thinking to say that the regular schedule is always good enough for your Sedan.

Contact Autoworks of Devon to learn more about Severe Service Requirements for your Sedan
You can find us at:
409 Bridgeport Ave
Milford, Connecticut 06460
Or call us at 203-877-1478

At Autoworks of Devon we’ll give you the definitions and explain the issues, and you can be the judge. Most manufactures list the following as severe conditions:

  • Most of your trips are less than four miles.
  • Most of your trips are less than 10 miles and outside temperatures are below freezing.
  • The engine is at low speed most of the time – not on the highway.
  • You operate your vehicle in dusty areas.
  • You regularly tow a trailer or carry heavy loads.
  • Driving in very hot or very cold weather.

So think about your typical week. Do you live a block from a Connecticut freeway on-ramp and enjoy a non-stop commute to work in Orange or Stratford? Or are you like the rest of us where 90% of our trips are on the severe service list?

The answer may be different at different times of the year and for the different drivers in your family. Think of the two service schedules as bookends. Let’s suppose your owner’s manual says the severe service oil change recommendation is 3,000 miles and the standard recommendation is 5,000 miles. You know that you need to change the oil somewhere between 3,000 and 5,000 miles. Look at your driving patterns and Milford road conditions and honestly evaluate which end of the spectrum you’re closer to.

If you have a job in a neighboring town such as Milford or Orange and most of your commute is freeway miles, you may choose the regular service schedule for your car. On the other hand, if you live within a few miles of work and only get on the highway a handful of times every month, something closer to the severe service schedule is more appropriate.

Now why is this so important? Moisture builds up in the engine oil from normal condensation. Short trips around Bridgeport or driving when it’s really cold means that the engine doesn’t heat up enough for the moisture to evaporate. The water in the oil leads to oil sludge that gums up your engine and doesn’t let the oil protect it as well. That’s why you need to change your oil more frequently – to get the sludge out before it causes problems.

Towing, heavy loads and very hot Connecticut summer weather means that your engine and transmission will operate at higher temperatures and with more stress. The fluids will break down more quickly. Additives that clean and prevent corrosion will be depleted sooner. Dusty conditions, which may extend also to areas with high air pollution, mean that fluids will get dirty faster and that filters will plug up and won’t work right.

All of these things can lead to premature wear and repairs down the road. They’ll also hurt your fuel economy. If you want some personalized advice, talk with your Dependable Autoworks of Devon service advisor. We can help you restore your vehicle to good working order and help you know the best schedule to follow. If you’re not sure, err on the side of protection.

Watch our informative AutoNetTV auto video tips at the top of this post.

Posted in Monitoring System | No Comments »

What To Do In Case Of An Accident in Bridgeport

December 23rd, 2009 by greg106

Screeching tires, crunching metal – it’s an accident! If you’ve ever been in a car accident in Bridgeport, even a minor one, you know how upsetting it can be. It’s hard to think straight and know what to do.

Let’s review what you should do in case of an accident:

When an accident occurs, you should always stop. Leaving the scene of an accident in Milford is considered a crime – even if it’s not your fault. And hit and run penalties are fairly severe, possibly resulting in steep fines, loss of your Connecticut driver’s license or even jail time.

Your jurisdiction may require that you try to help someone who is injured by calling for help or performing first aid if you are able. Warn other Orange and Stratford motorists by putting out flares, using your flashers or lifting your hood. Call Bridgeport emergency services as soon as possible. Tell the operator if medical or fire help is needed.

Always file a Milford police report. It’s tempting to skip this if everything seems to be ok. But without a police report, the other guy can say whatever he wants about the accident later, and you’ll not have an objective report to help defend yourself. Discuss the accident only with the police. Emotions are strong after an accident and we naturally want to talk about it – don’t. Never admit fault or guilt to anyone including the police officer. Sometimes we may feel at fault, but in the eyes of the law, the other guy is responsible.

Truthfully give the officer the facts: such as “I was going thirty miles an hour” not “I wasn’t speeding”. Remember, anything you say to the officer or anyone else can be used against you.

Also get the officer’s name and ID number and ask where you can get a copy of the accident report.

Get the facts on the driver and owner of the other vehicle:

  • Name
  • Address
  • Phone number
  • Date of birth
  • Driver’s license number and expiration
  • Insurance information

Also take down a description of the other Milford vehicle, license plate and vehicle identification number. Most Connecticut auto insurance companies don’t record license plate numbers, so the VIN number is the best way to track the vehicle.

Ask witnesses, including passengers, to wait for the police. If they can’t wait, ask for contact information and request that they write a brief description of what they saw. If someone refuses to leave their name, write down their license plate number so the police can track them down later if necessary. Always call your insurance agent or your insurance company. Call or see a physician if you think you may have been injured. For vehicle repairs, call Autoworks of Devon at 203-877-1478

Contact Autoworks of Devon to learn more about what do do in case of an auto accident.
You can find us at:
409 Bridgeport Ave
Milford, Connecticut 06460
Or call us at 203-877-1478

Autoworks of Devon and AutoNetTV hope that you never have to use this information and wish you happy Milford travels.

Posted in Automotive News | No Comments »

What Milford Automotive Service Consumers Should Know

December 15th, 2009 by greg106

There are some things Bridgeport consumers should know about Milford automotive service and repair. First and foremost, Autoworks of Devon cares about you and your family’s safety. And we really appreciate your business. Autoworks of Devon in Milford wants to build a trusting relationship that becomes the foundation for a mutually beneficial experience for years to come.

Building on that foundation, there are some things that would help you understand the auto service and repair business better. First, it can be really hard to fix cars. The days of shade tree mechanics are long gone. The majority of automotive systems are computerized. It takes a lot of training and very expensive equipment to diagnose and repair modern vehicles. The technicians that work for Autoworks of Devon need extensive computer training – not just how to run the diagnostic systems, but also searching for the right parts, networking with other technicians to help them with a difficult problem and pulling together a job order that makes sure that each step of the process is addressed.

The threshold for getting started as a technician gets higher all the time and there is a huge commitment to on-going training every year. This training takes time and money. It contributes to business overhead. The average Milford or Orange driver may not realize the business and environmental regulations Autoworks of Devon must comply with. Of course that costs money too. Like any business, overhead is a big factor.

When you go into a Bridgeport restaurant you don’t value the meal by what the food would cost at the grocery store. The restaurant has rent, wages, insurance, taxes, utilities, professional fees, equipment, supplies – you get the picture. The restaurant has to charge enough to not only pay for the ingredients, but for all these other things as well while making enough profit to remain in business. If you value the meal and are satisfied with your dining experience, you’ll come back and tell your friends.

It’s the same for Autoworks of Devon. The value of its service is not the cost of the parts they replace, but in your satisfaction with the results. If they deliver a good product at a fair price, Milford customers are happy to see them succeed as a Connecticut automotive business.

Contact Autoworks of Devon to learn more about our extensive auto service training.
You can find us at:
409 Bridgeport Ave
Milford, Connecticut 06460
Or call us at 203-877-1478

Your Milford service center loves to see its customers whenever they come in, but they would much rather see them three or four times a year for routine maintenance than once a year on a tow truck. They want to work together with you to avoid breakdowns. Tell your Bridgeport area friends and family to go in for their scheduled maintenance too. That lowers the service center’s marketing costs and helps keep its labor rates down. That’s good for everyone.

Autoworks of Devon appreciates this great review of automotive service from AutoNetTV.

Posted in Service Standards | No Comments »

Timing Belt Replacement in Milford

December 9th, 2009 by greg106

Today we want to talk about timing belts. They’re something that many Milford drivers don’t know much about and yet your vehicle won’t run if it’s broken – and it could cause many thousands of dollars damage if it does break. A broken timing belt is usually a tale of woe. Even though timing belt replacement is scheduled in the owner’s manual, it’s not the kind of thing that most Bridgeport car owners remember because it’s not well understood.

Let’s review what a timing belt does. As you know, the engine’s power is generated in the cylinders. A piston rides up and down in the cylinder. During the first down stroke, an intake valve at the top of the cylinder opens and air and fuel is drawn into the cylinder. Then the piston returns to the top, compressing the fuel and air mix. At the top, the spark plug fires, igniting the fuel pushing the piston down in the power stroke. As the piston once again returns up in the final stroke of the cycle, an exhaust valve opens at the top of the cylinder and the exhaust is pushed out. The timing belt is what coordinates the opening and closing of the intake and exhaust valves. It’s called a timing belt because the valves have to open and close at just the right time.

Now, not all Milford and Orange vehicles have timing belts. Some have timing chains. Like the name implies, they use a chain rather than a belt to perform the function. It used to be that most engines used timing chains, which are extremely durable. Manufacturers started using belts rather than chains to save money in the manufacturing process. So now we’re left with a component that can break. They sort of shifted the problem to us. There are two broad categories of engine design: interference and non-interference. If the timing belt on a non-interference engine breaks, the engine simply stops running. That could be very dangerous depending on where you are at the time, but it causes no internal engine damage.

Interference engines, on the other hand, will get real messed up when the timing belt breaks, because the valves will actually fall down into the path of the pistons. Things get chewed up when that happens and it’ll cost thousands to repair the engine.

So, what are the warning signs? Unfortunately, there really aren’t any. There aren’t tell-tale sounds. In some vehicles, a technician from Autoworks of Devon may be able to see part of the belt for a visual inspection, but many have a cover that’s in the way. The reality is that if the belt slips even one notch, it might as well be broken for all the damage it’ll cause. There’s no middle ground.

So how can we avoid these problems? Simply replace the timing belt when your owner’s manual calls for it. It can be 60,000 miles; it might be 90,000 or 100,000 miles. The point is, if you have 60,000 or more miles, ask your Autoworks of Devon service advisor right away if your manufacturer requires a timing belt replacement.

Contact Autoworks of Devon to learn more about your car’s Timing Belt
You can find us at:
409 Bridgeport Ave
Milford, Connecticut 06460
Or call us at 203-877-1478

Sometimes you can go quite a while without a failure, but we’ve seen them happen within a couple of oil changes of being due. It’s not worth the risk.

What does it cost to replace a timing belt in Orange or Stratford? Well, that really depends on what kind of car you have. I can tell you that it’s usually not very easy to get to the timing belt – you often have to remove some accessories to get at it. It isn’t a cheap procedure, but it’s a fraction of what it could cost to repair the damage caused by a failure.

At Autoworks of Devon we’re all about trying to prevent costly repairs, keeping you and your passengers safe and increasing your driving enjoyment. Thanks to AutoNetTV for their great auto video tips.

Posted in Parts | No Comments »

Nitrogen Fill For Tires in Milford Connecticut

December 3rd, 2009 by greg106

So, everyone in the Milford Connecticut area knows how great helium is – you know, party balloons, squeaky voices. But a lot of people around Milford still haven’t heard about the benefits of nitrogen in your tires, and how it can help your tires. Here’s some great advice from AutoNetTV, brought to you by Autoworks of Devon.

Nitrogen has actually been around for a long time in the Milford Connecticut commercial sector, but it’s just starting to catch on for private vehicles in the 06460 zip code area.

Why nitrogen in your tires? Air is air, right? Actually, it turns out there is a difference.

Contact Autoworks of Devon to learn more about nitrogen in your tires
You can find us at:
409 Bridgeport Ave
Milford, Connecticut 06460
Or call us at 203-877-1478

The heart of the matter is maintaining proper tire inflation. When your tires are properly inflated, they last longer, handle better and more safely, and save you money at the gas pump.

The problem is that tires filled in Milford with regular air can lose a pound and a half of air pressure every month. This just happens as the oxygen in the tire seeps out. So if you don’t check your pressure for a month or two, well, you can be significantly low – low enough to actually affect your handling, shorten tire life and waste money at the fuel pump.

How does nitrogen help? Regular air contains about 78% nitrogen. Nitrogen is the largest molecule in air. It’s dry and non-flammable. Air also contains 21% oxygen, which is smaller and seeps out of the tire three to four times faster than nitrogen.

So, a tire filled with nitrogen at Autoworks of Devon will take about six months to lose as much pressure as regular air does in just one month. So it’s more forgiving for those who don’t check their pressure every week.

Also, when oxygen is at higher temperatures – like those inside your tire when you’ve been driving for awhile – it oxidizes the inside of your tire. Getting the oxygen out of your tire means that it’ll last longer.

Who’s using nitrogen? Well, let’s start with NASCAR and Indy. These racers like nitrogen’s ability to maintain consistent tire pressure and reduce tire temperatures under very demanding conditions. The US government requires all commercial aircraft to have nitrogen in their tires. NASA and the US Military use nitrogen. The mining industry has been filling those “humongous” tires with nitrogen for years. And semi trucks and trailers are starting to use nitrogen extensively.

You may have heard some detractors of nitrogen. But the studies and white papers from tire and vehicle manufacturers demonstrate that the technology really works.

In fact, a prominent consumer research group did a study where they filled some tires with air and some with nitrogen and stacked them outside for a year. They observed that the nitrogen filled tires did hold their pressure better, but they couldn’t see the economic benefit. But that particular test has very little to do with the real world. Most tires are actually holding up cars and they also get driven around and do a lot of work. So if nitrogen helps them last longer, saves gas and gives safer handling, it’s worth considering.

Learn more about nitrogen in your tires by watching our attached auto tips video from AutoNetTV.

Posted in Tires and Wheels | No Comments »

E-85 Fuel Safety Advice From Autoworks of Devon

November 27th, 2009 by greg106

Today at Autoworks of Devon we want to talk with you about a very important safety issue. This automotive safety warning is coming from a very unusual source: fire fighting experts. You’ve probably heard of E-85 gasoline being offered in the Bridgeport area. Some newer vehicle models are specifically built to run on E-85 – the rest are not.

Does your vehicle use E-85 gasoline? Bring it down to Autoworks of Devon at 409 Bridgeport Ave in Milford, Connecticut 06460 to find out, or give us a call to make an appointment by calling 203-877-1478.

E-85 gasoline has been developed to fight air pollution and reduce oil consumption. E-85 fuel is a mix of 15% ethanol, a grain-base alcohol, and 85% gasoline. So-called Flex-Fuel vehicles are designed to use either normal gasoline or E-85 gas. The result is lower harmful exhaust emissions to our local Bridgeport community.

All gas engines can run with up to 10% ethanol and in fact a lot of gasoline sold in the Milford Connecticut area does contain some ethanol. The problem comes when well meaning people without Flex Fuel certified vehicles put E-85 into the tank.

At a 15% concentration, the potential for problems arises. Because of the chemical differences between ethanol and gasoline, special seals and gaskets are needed for Flex Fuel vehicles in Milford Connecticut. In a normal engine, the ethanol in E-85 gas will eat away important seals and gaskets. This leads to gas and oil leaks.

You can imagine the fire hazard caused by leaking gasoline. Fire fighting experts caution consumers to only use E-85 if they know they vehicle is certified to handle it. They expect vehicle fires to increase because of using the wrong fuel in non-Flex Fuel vehicles.

So are people who don’t have a Flex Fuel vehicle but use E-85 to help the environment actually putting themselves at risk? Yes. In fact, service and repair centers in Milford Connecticut are being warned to purchase fire extinguishers that use the special foam needed to extinguish ethanol fires as a precaution in case starting-up an ethanol damaged engine leads to a fire.

Obviously, this isn’t something you want to have in your Milford Connecticut garage at home, either. If you have a Flex-Fuel certified vehicle, feel free to protect the environment by using E-85 gasoline. If not – please do not use E-85 in an engine that’s designed to run on unleaded gasoline only. At Autoworks of Devon we are concerned about your safety. If you have questions or want to find out how to determine if your vehicle can safely use E-85, go to www.e85fuel.com for more resources.

Take a look at our attached auto safety tips video from Auto Tips Videos.

Posted in Warranty | No Comments »

Drive Train – What You Need to Know In Milford

November 18th, 2009 by

One Milford automotive service issue that doesn’t get much attention is driveline service. Drivelines don’t get talked about very much around Milford, but they’re very important. First let’s define what the driveline is:

Taking a small step back, the power plant is comprised of the engine and transmission. The driveline starts there and includes all of the components that transfer power from the transmission to the wheels.

That’s not really a lot of components, but they handle the full force of the engine. Without the driveline you’re not moving. So we need to take good care of it. The driveline components differ depending on whether your vehicle has front wheel drive, rear wheel drive, all wheel drive or four wheel drive. For purposes of our discussion, we’re going to have to over simplify a bit.

If you are ready to have your drive train looked at, give us a call:
Autoworks of Devon
409 Bridgeport Ave
Milford, Connecticut 06460
Call Us at 203-877-1478

Let’s start with front wheel drive. The point where the transmission stops and the driveline begins is a little blurred with front wheel drive because the transaxle houses both the transmission function and the differential function. The half shafts that send power to each front wheel, come out of the transaxle. The shaft is connected to the wheel by a constant velocity, or CV, joint. The CV joint is protected from dirt and water by an airtight, flexible rubber boot.

So, driveline service would include properly servicing the transaxle and inspecting the CV boot to see if it’s torn or loose. If it is, it needs to be replaced and the CV joint inspected for damage. Repairs may be in order. Besides visual damage to the airtight CV boot, you might hear a clicking noise when turning. Recommended maintenance for the transaxle and CV joints will be spelled out in your owner’s manual or check with your Milford service advisor.

On to rear wheel drive. The driveline for a rear wheel drive vehicle starts with the driveshaft – that long tube that connects the transmission with the differential on the rear axle. Some vehicles in Milford have a two piece drive shaft. The shafts are connected to the transmission and the differential with big universal joints. You’ve probably heard the term ‘u-joints‘. These joints can wear out, just like the CV joints in front wheel drive vehicles. You may hear some clunking or feel a jolt when shifting into drive or reverse – if you do, get your driveline inspected.

The differential on the rear axle sends power out to each rear wheel through half shafts in the axle. The differential fluid needs to be drained periodically and replaced with clean fluid. When the seal on the end of the axel is damaged or leaks, the axel will need to be serviced. The routine maintenance item here is differential service. Be sure to check your owner’s manual or Milford service advisor for intervals.

Now let’s go on to all wheel drive. Remember that the difference between all wheel drive and four wheel drive is that an all wheel drive vehicle is essentially providing power to all of the wheels all of the time. The vehicle may be able to shift more of the power to the front or to the back depending on where you need traction. All wheel drive vehicles are designed to work well on dry pavement. Even some high-end sports cars from makers like Lamborghini and Porsche have all wheel drive.

Some all wheel drive vehicles are designed to work well off-road, but all hard-core rock crawlers are four wheel drive. These guys thrive in mud, sand, rocks and hills – but they don’t work well on dry pavement when they’re in four wheel drive. So they have the option to shift to rear wheel drive only on dry pavement.

Most all-wheel drive vehicles are very similar to front wheel drive when it comes to the front end. They also have a center differential that transfers power to the rear differential. Connecting it all is a shaft from the transaxle to the center differential and another from the center differential to the rear differential. So all of the normal front wheel drive service is required as well as service to the center and rear differentials.

Four wheel drive can be thought of as a rear wheel drive vehicle that can also send power to the front axle. There’s a transfer case in the middle of the vehicle that can be shifted to send power through a drive shaft to a differential on the front axle. So you need differential service for the front and rear differentials and for the transfer case as well.

The bottom line is that the maintenance schedules are in your owner’s manual. Your Milford service advisor can answer any questions you’ve got. If this is the first time you’ve heard some of this stuff – it’s time to ask someone at Autoworks of Devon if any of it needs to be done now.

Watch our auto tips video from AutoNetTV.

Posted in Drive Train | No Comments »

« Older Entries